www.cplabsafety.com

The ECO Funnel® is the ultimate lab safety product for collection of hazardous liquid waste. Its unique, patented design performs two functions, acting as both a sealed waste container and a solvent funnel. The 4" ECO Funnel® is made of HDPE and has a 450 mL fluid capacity. This solvent funnel with lid features an easy use lid, gasket, and positive latch to close lid and maintain an air-tight seal. A filter is also built into the interior to reduce the loss of stir sticks or other particles in the waste liquid.

• 4" wide funnel with lid, gasket fits Justrite safety cans with a polypropylene quick disconnect fitting
• 11" stem also reduces chemical evaporation of hazardous solvents in the lab
• Funnel top without the stem measures 5"W x 7"L.
  
• large particle filter catches stir bar and large debris
• Constructed of chemically resistant HDPE
• can be fitted with up to 4 HPLC waste lines

This ECO Funnel® System allows our 4" ECO Funnel® to quickly connect to a Justrite Centura Quick Disconnect safety can. The system includes a 4" ECO Funnel® with a customized polypropylene adapter and a 2 gallon safety can. This quick disconnect adapter allows the user to keep the metal lid in a closed position. Each quick disconnect has a minimal 3/8"ID bore, so the rate of drainage will be reduced as compared to regular ECO Funnel®. This is perfect for connecting HPLC waste lines to the side of the funnel and for occasional pouring of waste solvents into the funnel. For optimal safety, the ECO Funnel® should be removed when not in use. As with all solvent-based applications chemical compatibility with the materials should be investigated prior to purchase. Note that the funnel adapter will only mate with adapter of similar material on safety can.

Dimensions: Lid Open	12"L x 15"W x 27.5"H
Dimensions: Lid Closed	12"L x 15"W x 22"H
Funnel	4" ECO Funnel® EF-4-38-006
Container	5 Gal Safety Can JP-PP12755

Features of the ECO Funnel®

• Solves the "open waste container" problem.
• Prevents emissions of 99.9% of volatile waste solvents, acids, and bases in the laboratory.
• Maintains an average cost of approximately $0.07 per day, assuming a four-year product use.
• Has a unique, patented design that meets most local, state and federal safety regulations and requirements.
• May be used again and again and resists nearly all corrosive chemicals.
• Is considered a state of the art product by environmental health and safety officers and industry professionals.
• Applies to Pharmaceutical, Biotech, Academic and Government laboratories and is widely used.

The 4" ECO Funnel® is made of HDPE and has a 450mL fluid capacity. This solvent funnel with lid features an easy use lid, gasket, and positive latch to close lid and maintain an air-tight seal. An 11" stem also reduces chemical evaporation of hazardous solvents in the lab. Funnel top without the stem measures 5"W x 7"L.

• 4" wide funnel with lid, gasket fits Justrite safety cans with a polypropylene quick disconnect fitting
  11" stem also reduces chemical evaporation of hazardous solvents in the lab
  Funnel top without the stem measures 5"W x 7"L.
  large particle filter catches stir bar and large debris
  Constructed of chemically resistant HDPE
  funnel has a 450 mL fluid capacity
  can be fitted with up to 4 HPLC waste lines

Please note: Because of the complex nature of  chemicals, Justrite and/or CP Lab Safety cannot offer specific recommendations on chemical  compatibility [for your safety can]. Your chemical supplier, MSDS sheets, or other expert  sources should be consulted. To aid in your decision process to select  the appropriate Justrite and/or CP Lab Safety product for your application, contact Justrite and/or CP Lab Safety  Customer Service to obtain sample material parts for you to test with  the chemicals you are using. Justrite and/or CP Lab Safety makes no guarantee of results and  assumes no obligation or liability in connection with the use of these  products and their application relative to their chemical compatibility.  It is the end user's sole responsibility to determine the nature of the  materials to be contained and to select the proper product suitable for  a particular application. Furthermore, it is the end user's  responsibility to insure that the product selected is suitable for its  intended use. Justrite and/or CP Lab Safety makes no warranty, expressed or implied of merchantability or fitness for purpose,  and assumes no liability in connection with any product made or sold by  Justrite and/or CP Lab Safety with regard to its use or chemical compatibility.