www.cplabsafety.com

The ECO Funnel® is the ultimate lab safety product for collection of hazardous liquid waste. Its unique, patented design performs two functions, acting as both a sealed waste container and a solvent funnel. The 8" ECO Funnel® is made of HDPE and has a 2000 mL fluid capacity. This solvent funnel with lid features an easy use lid, gasket, and positive latch to close lid and maintain an air-tight seal. A filter is also built into the interior to reduce the loss of stir sticks or other particles in the waste liquid. (See diagram.)

• 8" wide funnel with lid, gasket and screw cap fits plastic drums with a 2" NPT (fine thread) opening
• 11" stem also reduces chemical evaporation of hazardous solvents in the lab
• secondary air lock tube helps prevent overfilling and spills
• Funnel top without the stem measures 9"W x 11"L
• large particle filter catches stir bar and large debris
• Constructed of chemically resistant HDPE
• can be fitted with up to 8 HPLC waste lines

Features of the ECO Funnel®

• Solves the "open waste container" problem.
• Prevents emissions of 99.9% of volatile waste solvents, acids, and bases in the laboratory.
• Maintains an average cost of approximately $0.07 per day, assuming a four-year product use.
• Has a unique, patented design that meets most local, state and federal safety regulations and requirements.
• May be used again and again and resists nearly all corrosive chemicals.
• Is considered a state of the art product by environmental health and safety officers and industry professionals.
• Applies to Pharmaceutical, Biotech, Academic and Government laboratories and is widely used.

• 8" wide funnel with lid, gasket and screw cap fits plastic drums with a 2" NPT (fine thread) opening
• 11" stem also reduces chemical evaporation of hazardous solvents in the lab
• secondary air lock tube helps prevent overfilling and spills
• Funnel top without the stem measures 9"W x 11"L
• large particle filter catches stir bar and large debris
• Constructed of chemically resistant HDPE
• funnel has a 2000mL fluid capacity
• can be fitted with up to 8 HPLC waste lines