Qorpak
Safety Coated Amber Bottle, 16oz with Black Phenolic Rubber Lined Caps, case/12
- Part Number:
- QP-GLC-02263
- Lead Time:
- Custom assembly: 4-6 weeks
- Shipping:
- FREE SHIPPING on most orders over $50*
- Quantity:
- 12
- Size:
- 500 ml / 16 ounce
- Closure Size:
- 28-400
- Color:
- amber
- Material:
- glass
- Style:
- bottle
- Closure Style:
- screw thread
- Cap Liner:
- rubber
Bulk discount rates
Automatically save when you buy in bulk.
Buy 6 - 11 | and get 10% off |
Buy 12 or above | and get 15% off |
Description
Amber Boston Rounds, 16 oz (500 mL) Plastic Coated Glass with Black Phenolic Rubber Lined Caps, Autoclavable. Safety Coated (Plastic Coated) Amber Boston Rounds protect your sample from UV rays and are ideal for light sensitive products. If the glass breaks, the plastisol coating contains the substance in the bottle long enough to allow for proper disposal. These bottles are slip and impact resistant, making them the perfect bottle for handling volatile substances.
Attached 28-400 Black Phenolic caps with 14B White rubber liners are autoclavable, but plastic coated bottles are not autoclavable. Rubber cap liner is FDA approved for food and pharmaceutical applications. Excellent properties of resilience, resistance to moisture vapor and relatively low gas transmission. Typically ships from Pennsylvania.
- Style: Boston Round Bottle
- Size: 75 x 168mm
- Color: Amber
- Material: Glass
- Qty: 12
- Treatment/Grade: Safety Coated
- Attached Cap: Black Phenolic Rubber Lined Cap
- Capacity / Volume: 16oz (480ml)
- Neck Finish: 28-400
Please note: Plastisol Coating FI-5429NP was formulated without any phthalate esters that are listed on the Proposition 65 chemicals list. When properly applied and fused, Plastisol FI-5429NP Clear will meet the following requirements:
Test | Method | Results |
Color | Visual | Clear |
Weight per Gallon | ASTM D891, Method B | 9.97 + .05 |
Hardness | ASTM D2240, Instantaneous | 80 + 5 |
Hardness | ASTM D2240, 15 Seconds | 75 + 5 |
Tensile | ASTM D638 | 2100 PSI Minimum |
Tear | ASTM D1002 | 265 PLI Minimum |
Elongation | ASTM D638 | 350% Minimum |