Transparent Drain Seal, Urethane, Clear, Outdoor, 18" x 18"

Transparent Drain Cover Allows Responders to See Spills Are Being Stopped. Use the Ultra-Drain Seal Protective cover for drains, grates and manholes against accidental spills.

Features:

• No need to manually raise or lower the end walls.
• Once a vehicle has entered or exited, the walls automatically spring back to their vertical position.
• Both long sidewalls are held upright by PVC sidewall assemblies. Simply swivel the feet to lower the sidewalls for storage or transport to another location.
• Convenient and economical spill containment for drums, IBCs, vehicles, equipment, frac tanks and other large containers.
• Helps meet SPCC and EPA Container Storage Regulation 40 CFR 264.175.
• Made in the USA.
• Clear material provides unobstructed view of covered drains - enables responders to make sure a complete seal is made.
• No more guesswork about Drain Seal effectiveness - quickly see if spills are entering the drain through cracks in the surface, imperfections in the grating, or other irregularities that can break the seal.
• Reinforcing mesh is sandwiched between layers of polyurethane -increases durability and resistance to tearing.
• Unique, urethane construction allows the pad to deform and seal off most drains - temporarily "seals" to any smooth surface.
• Helps comply with SPCC and NPDES

Follow these easy steps to assure maximum effectiveness:

1. Make sure the Ultra Drain Seal is the correct size. For best results, use a drain cover which is 6" larger than the outside of the grate.
2. Applying the Ultra Drain Seal storm drain cover:
   1. Remove all stones, branches, or other debris off the object you desire to cover.
   2. Remove the plastic film from the Drain Seal and remember to re-apply it before storage.
   3. Place the Drain Seal over the drain, grate, or manhole you desire to seal.
   4. To gain a faster seal you may step on the Drain Seal. However never attempt this after spill has reached the drain.
   5. Drain Seal helps seal off drains and allows for inspection to minimize problems!
3. Always decontaminate the drain cover before reuse or storage.
   1. Wash the Drain Seal and its plastic film in warm water with a non-abrasive detergent or petroleum solvent cleaner.
   2. Dry both the Seal and plastic film with a cloth and re-apply the plastic film to the Drain Seal.
   3. Using the tube provided, roll up the Drain Seal and place it back into the container for storage.
   4. Store the Drain Seal out of direct sunlight, at room temperature.

IMPORTANT NOTES:

1. Never allow the Drain Seal to touch itself for long periods of time.
2. The Drain Seal will become less flexible if stored in cold temperatures.
3. Due to the nature of softer urethane, the physical properties of these products may change with exposure to certain environmental conditions like temperature, humidity and UV radiation. Please inspect the stored product regularly to ensure it is in a usable state.
4. Not intended for long-term outdoor use (more than two (2) hours), as UV exposure and/or heat for extended periods can degrade the product. For applications where extended use may be required, the Ultra-Drain Seal Plus should be considered.

Documents

• Ultra-Containment Berm Ultimate Model Specs and Instr
• Ultra-Containment Berm Comparison Guide