Racks & Tube Storage

Stainless Steel Petri Dish Can Model 1370S Keeps dishes stacked and within reach Holds 15 dishes 100 mm x 10 mm Dimensions: 10.8 cm (4-1/4") diameter by 22.8 cm (9")

Freezer Rack, 200-Place, Acrylic, for 16mm tubes. Clear acrylic Refrigerator-Freezer Storage Tube Racks for storage of 16mm specimen tubes for refrigerator or freezer. Refrigerator freezer tube rack allows sufficient space for labeling of individual...

Wireless Tube Rack, 20mm, Full Size: 40-Place, Nylon. Fully Autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three (3) tier grid design for secure and stable racking of...

Organize and store samples with space-efficient Thermo Scientific Nalgene Unwire Half-Racks, which have all the features of full-sized Unwire racks but occupy half the space. Ideal for use in incubators, refrigerators, freezers, under lab hoods and on...

This test tube rack holds 50 culture tubes securely. The foam material is chemical and solvent resistant and makes it ideal for refrigerated or frozen storage samples. Fits 10x75mm, 12x75mm & 13x100mm Tubes. Flame Retardant color: Charcoal Long wearing...

WHEATON® 90 Position Rack, PP, 17.1mm Open ID. vial racks come in a variety of sizes. The racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the...

Sturdy, economical, and convenient racks for samples stored in 20mL vials (29mm well diameter.) Can be stacked when not filled, for easy storage. Each well features a drainage hole at the bottom. Autoclavable at 120°C for 20 minutes. 50 (10 x 5)...

Nessler Cylinder Rack for 50ml cylinders. Polypropylene rack is designed to hold six Nessler cylinders. Flat lower deck is white to provide a reflective surface. Chemical and corrosion resistant rack can be autoclaved at 121°C (250°F.)

Our 96-well Microcentrifuge Tube Racks are designed so that one side of the rack accommodates 0.5mL microcentrifuge tubes. The reverse side holds 1.5mL to 2.0mL microcentrifuge tubes and screw cap microcentrifuge tubes. The optional clear polypropylene...

Freeze cells in tubes from 1.2 to 2mL using the Nalgene 5100-0001 Mr. Frosty trade; Freezing Container. This Cryo Freezing Container is inexpensive, reusable and convenient for freezing biological samples at the recommended controlled rate of cooling,...

Organize and store samples with space-efficient Thermo Scientific Nalgene Unwire test tube racks. Ideal for use in incubators, refrigerators, freezers, under lab hoods and on bench tops, these racks work in ice or water baths and will not float. They are...

WHEATON® 50 Position Rack, PP, 28.1mm Open ID. vial racks come in a variety of sizes. The racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the...

WHEATON® 36 Position Rack, PP, 23.1mm Open ID. vial racks come in a variety of sizes. The racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the...

Streamline benchtop sample processing with a portable rack that can be used for transportation and incubation. Holds fifty-four 60mm Petri dishes and lids. Six column rack has finger access slots in the base for safe, easy removal of stacks of dishes...

Molded in a single piece for exceptional strength and durability, these racks have no coating to chip, peel or rust. Nalgene Test Tube Rack, Unwire, Blue 30mm Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges...

Glassware Drying Rack, 72 pegs, 18x25". This Lab Drying Rack is made of High Impact Polystyrene. Expandable, fasteners to connect additional racks included Acrylic stand for our most popular drying rack This 72 place drying rack is molded of high...

Nalgene Test Tube Rack, Unwire, Blue 16mm Nalgene Unwire Test Tube Racks by ResMer Manufacturing Technology. Securely hold a full load of 16mm test tubes or centrifuge tubes with Nalgene Unwire Test Tube Racks. Molded in a single piece for exceptional...

Stainless Steel Cleansing & Storage Basket, Diamond Flow-Thru Pattern, 6" x 6" x 6". Made from ASTM Standard (899-94) Stainless Steel For Microbiological Specimens, Storage and Cleansing Lab Ware. Withstands Acid and Alkali Solutions. Unharmed by hot...

Stainless Steel Pipet Cleansing Rack & Angled Support Stand, Diamond Flow-Thru Pattern, 4.75" x 13.25". Made from ASTM Standard (899-94) Stainless Steel. Inclined Trough Shape at 33 & deg angle for drying and storage of pipets. Riveted aluminum and can...

Wireless Tube Rack, 30mm, Half Size: 9-Place, Nylon. Fully Autoclavable. Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three (3) tier grid design for secure and stable racking of tubes...