The following information from provided by Boekel Scientific on February 28th, 2020.
The 2019 Novel Coronavirus (2019-nCoV or SARS-CoV-2) is a positive-sense single-stranded RNA (+ssRNA) virus in the coronaviridae family, similar in sequence to the first SARS-CoV virus and bat coronaviruses.(1) The 2019-nCoV virus is a respiratory virus transmitted by respiratory droplets and is the cause of the ongoing 2019-2020 Wuhan coronavirus outbreak of disease now referred to as COVID-19. The Centers for Disease Control and Prevention developed a laboratory coronavirus test kit based on the full viral sequence published in January 2020.(2) This test was initially available only for use in CDC laboratories. However, beginning in February, CDC-qualified laboratories throughout the United States are able to test for the virus using the coronavirus test kit. Starting with nucleic acid purification, the test follows a standard viral testing protocol. The provided primer and probe are combined with the sample and other standard components for amplification through Real Time reverse transcriptase polymerase chain reaction (Real Time RT-PCR). Virus test kits are available through the International Reagent Resource (IRR) and are intended for use with the Applied Biosystems 7500 Fast DX Real-Time PCR Instrument with SDS 1.4 software.(3)
1. 2019-nCoV. Virus Pathogen Resource. Updated Jan 31, 2020. Accessed February 10, 2020. https://www.viprbrc.org/brc/home.spg?decorator=corona_ncov
2. Patel A, Jernigan DB. Initial Public Health Response and Interim Clinical Guidance for the 2019 Novel Coronavirus Outbreak — United States, December 31, 2019–February 4, 2020. MMWR Morb Mortal Wkly Rep 2020;69:140–146. http://dx.doi.org/10.15585/mmwr.mm6905e1
3. CDC Tests for 2019-nCoV. Centers for Disease Control and Prevention. Updated February 5. 2020. Accessed February 10, 2020. https://www.cdc.gov/coronavirus/2019-ncov/about/testing.html
Viral Testing Components for the CDC nCoV Protocol
To run the coronavirus test, your lab will need supplies beyond the elements of the virus test kit provided by the CDC. Outlined here are all the components necessary for compliance with protocol, some of which are standard laboratory supplies (like disposable powder-free gloves). If any component is missing in your lab, you should secure it before requesting virus test kits to ensure total compliance.
Reagents and Supplies (Consumables)
rRT-PCR primer/probe sets - Primer and probe sets are used during RT-PCR to make copies of nucleic acid.
These sets are specific to the coronavirus test and available from various
Positive template control - A positive template control is specific for the virus test. This control is run during the rRT-PCR assay and should always give a positive result. These templates are often supplied along with the specific primer/probe sets.
TaqPath™ 1-Step RT-qPCR Master Mix, CG (ThermoFisher; cat # A15299 or A15300) - This master mix is combined with the primer/probes and samples and run through the RT-PCR machine as part of the coronavirus test. Designed to be used with both RNA and DNA amplification, the master mix contains thermostable MMLV reverse transcriptase, dNTPs, UNG, ROXTM dye and thermostable Fast DNA polymerase.
Molecular grade water, nuclease-free - This sterile distilled water is used to dilute reagents and samples used in the RT-PCR process.
Disposable powder-free gloves - Wearing gloves during molecular processes decreases the likelihood of sample contamination and is particularly important for this coronavirus test.
P2/P10, P200 and P1000 aerosol barrier tips - Various sterile pipette tip sizes are needed when dispensing reagents, transferring samples and mixing small volumes of liquids. Tips with filters prevent aerosol contaminants from entering the tip.
Sterile, nuclease-free 1.5 mL microcentrifuge tubes - Reagents are placed in microcentrifuge tubes and gently mixed by micropipette. These tubes are spun in a centrifuge to concentrate the product at the bottom.
0.2 mL PCR reaction tube strips or 96-well real-time PCR reaction plates and optical 8-cap strip. PCR reaction tube strips are strips of eight tubes designed for multiple-sample testing. Well plates are used to efficiently test multiple specimens in one container along with a positive and negative control. Specific caps are needed to work with the optical PCR detection technology.
Laboratory marking pen- A good marking pen allows for easy tube identification and clear results. Do not mark on the tops of microcentrifuge tubes or PCR plate, as this can interfere with the optical detection operation.
Cooler racks for 1.5 microcentrifuge tubes and 96-well 0.2 mL PCR reaction tubes - Cooler racks secure microcentrifuge tubes while reagents and samples area added.
Racks for 1.5 ml microcentrifuge tubes - Convenient location for microcentrifuge tubes while combining reagents for
Acceptable surface decontaminants - DNAZapTM (Life Technologies, cat. #AM9890) DNA AwayTM (Fisher Scientific; cat. #21-236-28) RNAse AwayTM (Fisher Scientific; cat. #21-236-21 10% bleach) (1:10 dilution of commercial 5.25-6.0% sodium hypochlorite)
In addition to consumables, your lab will need to create an environment
conducive to controlling and completing the viral test. If your lab routinely
conducts polymerase chain reactions, you are likely already positioned to
comply with these environmental conditions. Otherwise, the following equipment
is vital for successful participation in the coronavirus test.(4)
PCR Workstation [UV lamp; Laminar flow (Class 100 HEPA filtered)] - An appropriate laboratory setup should be created when following viral detection protocols. A PCR workstation with germicidal UV lamp and laminar flow minimizes contamination of nucleic acid samples. Multiple stations and areas can be set up to prevent cross-contamination.
Vortex mixer - A vortex mixer efficiently mixes small volumes of liquids. Variable speed models allow adjustment from a gentle shaking motion to high speed mixing.
Microcentrifuge - A microcentrifuge uses a spinning mechanism to separate components in microcentrifuge tubes or PCR plates by mass. This results in a nucleic acid pellet at the bottom of the microcentrifuge tube.
Micropipettes (2 or 10 µl, 200 µl and 1000 µl) - Micropipettes are adjustable calibrated instruments designed to be used with
disposable sterile tips to transfer small quantities of liquid.
Multichannel micropipettes (5-50 µl)- Multichannel micropipettes are adjustable calibrated instruments designed to be
used with disposable sterile tips to transfer multiple samples of small
quantities of liquid at a time. These can be handheld or part of an automated
Cold blocks: 2 x 96-well cold blocks - Cold blocks secure sample tubes and maintain a cool temperature while reagents and samples are added.
-20C (nonfrost-free) and -70C freezers; 4C refrigerator - Various temperatures are needed for sample and reagent storage. In the nCoV protocol, three temperatures are specified for the viral test. Specimens can be stored at 4C for up to 72 hours after collection, but they should be stored at -70C or lower if a delay in extraction is expected. Extracted nucleic acids should be stored at -70C or lower.
Real-time PCR detection system - A real-time PCR detection system combines adjustable automated PCR cycling with optical detection technology. Associated software can make statistical analysis easier.
Nucleic acid extraction system - Nucleic acid extraction systems simplify the extraction process by providing a kit of reagents to quickly purify nucleic acid from various sources. Appropriate protocols are used to extract specific nucleic acid from tissue, whole blood or plasma. This can be a manual or automated process.
4. CDC Tests for 2019-nCoV. Centers for Disease Control and Prevention. Updated February 5, 2020. Accessed February 6, 2020. https://www.cdc.gov/coronavirus/2019-ncov/about/testing.html
Notes on Viral Testing - Additional equipment or supplies that may be required for viral testing in research laboratories
Additional processes may be involved in viral testing, including propagating the virus in cell culture or embryonated chicken eggs. Equipment needed for cell culture includes a cell culture hood, incubator (CO2 incubator) , water bath, centrifuge, microcentrifuge, refrigerator, freezer (-20C), cell counter, cryostorage or liquid nitrogen freezer and a sterilizer such as an autoclave. (5,6)
Disposables will include culture flasks, cell culture plates , petri dishes, pipettes , pipettors, appropriate media, sera and reagents and cell cultures. (7) Embryonated chicken eggs will require an egg incubator and egg candler.
NOTE: No laboratory would be complete without appropriate safety equipment and personal protective equipment appropriate for the biosafety level of the target virus. Universal precautions among all laboratory personnel are key to limiting the risk of infection and contamination. Designated separate areas for clean cell culture and viral cell culture growth should be maintained, and appropriate disposal methods made available.
5. ATCC Virology Guide. 2016. Updated 2016. Accessed February 10, 2020. https://www.atcc.org/~/media/PDFs/Culture Guides/Virology_Guide.ashx
6. Gibco Cell Culture Basics Handbook. 2016. Updated 2016. Accessed February 10, 2020. https://www.vanderbilt.edu/viibre/CellCultureBasicsEU.pdf
7. Brauer R, Chen P. Influenza virus propagation in embryonated chicken eggs. J Vis Exp. 2015;(97):52421. Published 2015 Mar 19. doi:10.3791/52421 https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4401370/
This article was written and approved for publishing by Amy-Jo Yogmas, Boekel Scientific