Justrite® Steel 2", Horizontal drum vent for corrosives, general solvents

Provide emergency pressure venting in the event of a fire to avoid drum failure and catastrophic consequences. All safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55kPa) and include a flame arrester to absorb and safely dissipate heat. Valve within the vent is tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds for vacuum relief during drum dispensing operations. Vacuum relief permits smooth liquid flow and prevents possible drum collapse and leakage. Vacuum relief is automatic on vertically-installed vents and manual on horizontally-installed vents.

Safety fill vents and funnels fit the 2-in (51-mm) bung on a vertically-stored drum. The brass vent provides automatic pressure and vacuum relief, and includes a brass cap with safety chain tethered to the vent to prevent misplacement or loss. Remove cap during drum filling operations. Model no. 08211 includes a 9-in(229-mm) wide polyethylene funnel to facilitate solvent waste disposal and reduce spillage. Keep vent capped in closed position after filling operations to prevent flammable vapor from escaping. Six-inch (152-mm) flame arrester safely dissipates heat and prevents flashback from external ignition sources.

Features:

• Relieve pressure build-up due to heat
• Stainless steel horizontal vent for corrosives and general solvents
• Manual close vacuum relief
• FM Approved

Specifications:

• Model No.: 08306
• International Model No.: 08306
• Material Specifications: Stainless Steel
• FM Approval: Yes
• Cover Type / Closure Type: Manual
• NPS/NPT inch: 2
• NPS/NPT mm: 51
• Net Weight, lbs: 0.9
• Net Weight, kg: 0.4