WHEATON® 1mL Borosilicate Glass Ampules, Clear, Pre-Scored, case/144

WHEATON® Laboratory Ampule, 1mL or 0.03oz, Clear Glass. (1 mL Ampule, Clear, Pre-Scored)This 1mL WHEATON® ampule is an all-glass container that can be hermetically sealed to preserve sample purity and extend sample shelf life. WHEATON® ampules are ideal for standards packaging, environmental standards, diagnostic standards and cryogenic storage. These Clear ampules help reduce sample contamination due to their ultimate tamper-evident seal. WHEATON® ampules are offered in sizes ranging from 1 to 50 mL capacity. The Gold Band® pre-scored feature eliminates filing. Two sealing methods can be used on these ampules. Tip Sealing Method: Holding the ampule body, insert the ampule stem into the sealing flame. Heat the stem 3-4 MM from the top of the ampule, until the melted glass fuses into a smooth dome. The Pull Seal Method: Hold top in the fingers of one hand. The flame should be approximately one-third of the way from the Gold Band and your fingers. As the glass softens, continue to rotate the ampule while pulling the top off the ampule. This will require very little force, allowing the glass to seal itself. As the top separates from the ampule, sealing occurs. This method can be used for all Ampule configurations.

• Pre-scored to eliminate filing
• Made from low extractable borosilicate glass
that conforms to USP Type I and ASTM E 438 Type I, Class A requirements
• Stems can be pull or tip sealed