10028 results for '70mm port cap'

43-400 Black Phenolic caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate. They are great for nail polish remover and higher concentration acids &...

The UN/DOT Filter Kit, VersaCap 70S EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two...

48-400 Black Phenolic caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate. They are great for nail polish remover and higher concentration acids &...

The EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines. This system...

The UN/DOT Filter Kit, VersaCap 70S EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two...

Port Cap for Nalgene Plastic Bottles with a 38-430 bottles, 4-port, with (4) 1/4-28 female ports, PTFE insert with PP collar. Choose adapters based on your tubing size. A set of plugs in included to...

Port Cap for Nalgene Plastic Bottles with a 38-430 bottles, 2-port, with (2) 1/4-28 female ports, PTFE insert with Polypropylene collar. Choose adapters based on your tubing size. A set of plugs in...

Whatman glass microfiber filter papers in grade 934-AH RTU have been pre-washed, dried (or ignited), cooled, desiccated and weighed, which eliminates the pre-treating steps that are otherwise...

83-400 Black Phenolic caps with solid PE liners offer good chemical resistance and low moisture vapor transmission rate. They are great for nail polish remover and higher concentration acids &...

120-400 White Polypropylene caps with SturdeeSeal® polyethylene foam liners are known for good impact strength, cost effectiveness, and pliability. These closures have excellent sealing...

Port Cap with 3 ports (1/4-28), PTFE insert, and blue Polypropylene collar. Fits glass bottles with a GL45 neck size. A set of plugs in included to maintain a closed system when holes are not in use...

43-400 Black Phenolic caps with White Rubber liners are autoclavable. This liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and...

38-400 Black Phenolic caps with White Rubber liners are autoclavable. This liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and...

Silicone Top Gasket, 70mm Cap. Replacement Components for CLS-1410- and CLS-1411-Series Spinner Flasks. The Replacement Shaft consists of the glass shaft only. Made in the United States.

18-400 Black Ribbed Phenolic Cap with 14B White Rubber Liner. Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated...

33-400 Black Phenolic caps with White Rubber liners are autoclavable. This liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and...

Port Cap with 2 ports (1/4-28), PTFE insert, and blue Polypropylene collar. Fits glass bottles with a GL45 neck size. A set of plugs in included to maintain a closed system when holes are not in use...

24-400 Black Phenolic caps with White Rubber liners are autoclavable. This liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and...

13-425 Black Ribbed Phenolic Cap with 14B White Rubber Liner. Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated...

Port Cap with 4 ports (1/4-28), PTFE insert, and blue Polypropylene collar. Fits glass bottles with a GL45 neck size. A set of plugs in included to maintain a closed system when holes are not in use...

28-400 Black Phenolic caps with White Rubber liners are autoclavable. This liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and...

Cap, 70mm, Blue, Polypropylene, Non-Sterile. Blue polypropylene cap is fully autoclavable at 121 degrees C. For a tight seal, cap must be used with our silicone liner (listed below). Made in the...

Black Phenolic caps with White Rubber liners are autoclavable. This liner is FDA approved for food and pharmaceutical applications. Excellent properties of resilience, resistance to moisture vapor...

The UN/DOT Filter Kit, VersaCap 83B EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two...

Cap Only, 70mm, Erlenmeyer/Fernbach Vented Cap, Sterile, Bagged. Designed for mammalian suspension culture applications as well as bacterial & yeast culture Conveniently pre-sterilized Autoclaving...

Waste line delivery port cap with 7 ports for 38-430 glass threaded bottles: (3) Type A 1/4-28 UNF ports and  (4) Type C 1/8" NPT ports. Chemically resistant Polypropylene manifold...

4-Port Solvent Delivery Port Cap Kit for GL45 Media Bottles, with Plugs, for use with 1/8" or 1/16" OD tubing in 1/4-28 adapters. Create a closed system with GL-45 safety caps, which seal to a bottle...

15-425 Black Ribbed Phenolic Cap with 14B White Rubber Liner. Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated...

White polypropylene hole caps with bonded PTFE/Silicone septa provide assurance that the septa will not slip away from the cap while injecting. The PTFE/Silicone septa has excellent resealing and...

The HD, VersaCap 83B EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two HPLC machines...

The UN/DOT Filter Kit, VersaCap 70S EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two...

3-Port Solvent Delivery Port Cap Kit for GL45 Media Bottles, with Plugs, for use with 1/8" or 1/16" OD tubing in 1/4-28 adapters. Create a closed system with GL-45 safety caps, which seal to a bottle...

Waste Manifold Port Cap for 2" drum openings. Choose 2" NPT or 2" buttress closure type depending on your drum style. Features 10 ports with (1) 1/2" NPT, (3) 1/4" NPT and (6) 1/4-28 with plugs...

Whatman glass microfiber filter papers in grade 934-AH RTU have been pre-washed, dried (or ignited), cooled, desiccated and weighed, which eliminates the pre-treating steps that are otherwise...

The UN/DOT Filter Kit, VersaCap 70S EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two...

The UN/DOT Filter Kit, VersaCap 70S EZwaste Solvent Waste System is designed to be an affordable solution for HPLC liquid waste disposal. Each system is manufactured to safely collect waste from two...

Whatman glass microfiber filter papers in grade 934-AH RTU have been pre-washed, dried (or ignited), cooled, desiccated and weighed, which eliminates the pre-treating steps that are otherwise...

Vented Screw Cap, 70mm, Blue, Polypropylene, Non-Sterile with 0.22um PTFE Membrane. Blue polypropylene vented cap has a 0.22um PTFE hydrophobic membrane to allow gas exchange while preventing...

Port Cap for Nalgene Containers with a 100-415 Closure. 10-port PTFE Waste Manifold features a free-spinning (non-wetted) polypropylene collar and (1) 1/2" NPT, (3) 1/4" NPT, and (6) 1/4-28 ports...

70mm Transfer Closure, (2) 1/8" OD Tube Ports The 70mm Transfer Closure with (2) 1/8" OD Tube Ports is designed for secure sealing and fluid transfer applications in laboratory and industrial...