Dual Vacuum Trap Assembly, O-Ring, Airfree, Borosilicate Glass

Dual trap assembly for use with CG-AF-0060 or CG-AF-0061 manifolds.

Pre-Trap (B) is 51mm OD x 250mm long with 28/15 polished socket joints to connect the line shut off adapter (A) to the main trap stopper assembly (C) which has 28/15 O-ring ball joints. The main trap (D) is constructed using a 57mm flat O-ring flange and the body is 57mm OD x 250mm long. Center to center distance between the traps is 175mm. Connection to the manifold is made via a #15 O-ring joint (E) while the fore-pump is connected to the main trap assembly at the (F) port using any size of AF-0070 or AF-0071 adapters depending upon the size of flexible tubing being used. A #15 O-ring joint (G) is placed between the main and pre-trap to permit connection of vacuum measurement device via a AF-0300-07 thermocouple adapter. Both traps can be isolated from the manifold or pump via 0-12mm Chem-Vac Chem-Cap® valves (H.)
Trap assembly is designed to allow connection to either the right or left side of CG-AF-0060 or CG-AF-0061 manifolds. Complete item is supplied with one #331 Viton O-ring, one CG-139-02 horseshoe clamp, three #116 Viton O-rings and two CG-150-05 #28 S.S. pinch clamps. Manufactured from Type I Borosilicate Glass.

Replacement Parts (Please call CP Lab Safety @ 888-322-5722 to order replacement parts.)

• CG-139-02 - Clamp, Horseshoe Style, 57mm Flange (each)
• CG-305-116 - O-Ring, Viton, #116 (Pack/12)
• CG-305-331 - O-Ring, Viton, #331 (each)
• CG-961-03 - 0-12mm Chem-Vac Plug with Control Knob (each)
• CG-150-05 - Clamp, Pinch, #28, Stainless Steel, Spherical (each)