PowerChem® PC-045-095GR Green Neoprene Exam Gloves, 3.5 mil, case/1000

High performance neoprene gloves provide superior resistance to chemicals, punctures, and abrasion.

Features:

• Silicone-free for critical environments
• Exceeds 1.5 AQL laboratory standards
• SHA Dermatologically Approved
• Optimal thickness for durability and tactile sensitivity
• Latex-free pure neoprene
• Tear-resistant beaded cuff for easy donning

Properties:

• Inner Surface: Smooth
• Outer Surface: Textured
• Cuff: Finish Beaded
• Fit Type: Ambidextrous
• Length: 9.5" / 242 mm
• Finger Thickness: 3.5mil / 0.09mm
• Palm Thickness: 2.8mil / 0.07mm
• Tensile Strength Before Aging: 14 MPa
• Tensile Strength After Aging: 14 MPa
• Elongation Before Aging: 500%
• Elongation After Aging: 400%
• AQL: 1.5

Compliance:

• EN ISO 21420:2020
• EN 455:2000-2015
• ASTM D6977-19
• Reach EU 1907/2006
• EU 2016/425
• FDA 21 CFR 177.2600

Viral Protection

SW gloves have been successfully tested against the stringent US and EU viral penetration test standards, thus giving stakeholders a high level of protection from viruses, bacteria and fungi. This reduces or eliminates the risk of exposure to biological hazards and guarantees quality of every glove produced. ASTM F1671 is the standard used in North America. It is a pass or fail test designed to show whether the material can protect a wearer from viruses transmitted via blood or bodily fluids. EN ISO 374-5 Virus standard, is the standard in Europe. It measures the ability of gloves to protect from bacteria, fungi and virus penetration using ISO 16604 as the test method.

SKIN HEALTH ALLIANCE APPROVED WORLDWIDE

SW® nitrile gloves have been clinically tested and proven to have reduced potential to cause skin irritation. This protection creates a cleaner glove with reduced chemical residues, removes the user's risk of allergic reactions, and will not induce contact dermatitis or Type IV hypersensitivity reaction.& To achieve a 510K Certification, a medical grade glove must meet ASTM and FDA standards. Tested by an FDA registered and certified US laboratory and headed by a board-certified dermatologist. Testing was conducted on a minimum of 200 human subjects, to qualify for the Low Dermatitis Claim.

• dermatologist tested
• skin safe products
• global standard adherence
• low environmental impact
• independently assessed