10028 results for 'gl45 port cap'

NMR Tube Cap, 5mm, White. Made from polyethylene, these caps are sized to fit 5mm O.D. NMR sample tubes. Cap fits tightly to stay in place during increased internal vaporization pressure. Available...

Cap, GL-32, Orange, Solid, Polypropylene. Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140 degrees C. Made in Germany.

Cell Strainer Caps for FACS Tubes offer an efficient solution for preparing cell suspensions by straining cells from clusters and tissue. Designed for compatibility with 12x75mm FACS tubes and...

Roller Bottle, Cap Only - Vented, Sterile, Bagged. Large knurled cap for easy grip Vented cap for open systems Vented Caps feature 0.22um hydrophobic membrane Shelf Life: 36 Months Country of...

Plug Cap, 16mm, Red, 1000/Bag. Polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

Flask, 50mL, Volumetric, Snap-Cap. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-beaded, heavy-Tubing necks, tooled for snap-cap...

Replacement GL Caps, GL-32, Blue, Solid Polypropylene. Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.

NMR Tube Cap, 5mm, Blue. Made from polyethylene, these caps are sized to fit 5mm O.D. NMR sample tubes. Cap fits tightly to stay in place during increased internal vaporization pressure. Available in...

NMR Tube Cap, 5mm, Green. Made from polyethylene, these caps are sized to fit 5mm O.D. NMR sample tubes. Cap fits tightly to stay in place during increased internal vaporization pressure. Available...

Cap, Screw, 38-430, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Cap, Screw, 24-410, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Stopper, 25mL, Snap Cap, Volumetric Flask. These blue caps provide an economical closure for certain volumetric flasks. Refer to volumetric flask listings to determine sizes and whether the flask is...

Cell Strainer Caps for FACS Tubes are designed for use with 5mL (12×75mm) culture and FACS tubes, providing an efficient solution for detaching, isolating, and straining cells from clusters and...

Cap, Screw, 15-415, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Flask, 250mL, Volumetric, Snap-Cap. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-beaded, heavy-Tubing necks, tooled for snap-cap...

Plug Cap, 16mm, 1000/Bag. Polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

Cap, Screw, 18-415, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Replacement GL Caps, GL-25, Blue, Solid Polypropylene. Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.

Cell Strainer Caps for FACS Tubes are designed for use with 5mL (12 x 75mm) culture tubes and FACS tubes. These sterile caps are perfect for detaching, isolating, and straining cells from clusters...

Cap, Screw, 24-400, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Flask, 100mL, Volumetric, Snap-Cap. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-beaded, heavy-Tubing necks, tooled for snap-cap...

Plug Cap, 16mm, Green, 1000/Bag. Polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

The Knurled Ferrule Cap Nut, with a diameter of 4mm, is designed to seal off tubing connections and features: Service temperature range of PFA: -328°F to 500°F (-200°C to 260°C)

The X100 Nebulizer with Make-Up Gas Port, featuring X-flow design, is engineered to be pumped but also offers free aspiration at approximately 100 µL/min with this uptake line. Fits all...

Cap, Screw, 40-400, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Bottle Assembly, 500mL, 2-Port, Single-Use with Male Luer. Strain relief molded into stopper at Tubing exit areas to prevent kinking Manufactured, assembled and packaged in Class 7 cleanroom USP...

The X400 Nebulizer with Make-Up Gas Port, featuring X-flow design, is engineered to be pumped while also offering free aspiration at approximately 400 µL/min with this uptake line. Make-up...

Cap, Screw, 24-400, TFE Liner. This cap is fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps are provided with a glued-in rubber liner...

Filter Adapter for Type C port, 90° Elbow, Polypropylene One recieving port, many options Whether attaching an exhaust filter to a collection manifold or to a quick disconnect on a safety can,...

Filter Adapter for Type D port, 90° Elbow, Polypropylene One recieving port, many options Whether attaching an exhaust filter to a collection manifold or to a quick disconnect on a safety can,...

Filter Adapter for Type C port, 45° Elbow, Polypropylene One recieving port, many options Whether attaching an exhaust filter to a collection manifold or to a quick disconnect on a safety can,...

Filter Adapter for Type D port, 45° Elbow, Polypropylene One recieving port, many options Whether attaching an exhaust filter to a collection manifold or to a quick disconnect on a safety can,...

Filter Adapter for Type E port, 45° Elbow, Polypropylene One recieving port, many options Whether attaching an exhaust filter to a collection manifold or to a quick disconnect on a safety can,...

Filter Adapter for Type E port, 90° Elbow, Polypropylene One recieving port, many options Whether attaching an exhaust filter to a collection manifold or to a quick disconnect on a safety can,...

Features: 2" NPT openings in lid The industry standard: blow molded, high molecular weight, high density polyethylene container. This container is designed to conform to UN recommendations for...

HPLC Waste Kit - Plus, GL38, 10-port, size L (4 x 1/4" NPT, 6 x 1/4-28)The 4-liter amber glass bottle with distinctive finger grip is as common in most labs as Parafilm® and pipettes. Used by...

Quad Port Adapter, M18 Thread, for Bio Reactors. The Quad inlet assembly fits into an 18mm head plate port. The assembly incorporates four separate pipes into one assembly for efficient use of space...

These polypropylene straight-sided vials are for use with the AS-40 or the AS-DV autosampler. Filter caps are molded of Polyethylene and have a porous filter plug. Superior filter cap design aligns...

Filter Adapter for Type C port, Adjustable, Polypropylene/acetal One recieving port, many options Whether attaching an exhaust filter to a collection manifold or to a quick disconnect on a safety...

Cap, Snap, 12mm, Dual Position, LDPE, 500/Bag, 2 Bags/Unit. dual position cap is produced from low density polyethylene (LDPE) and is ribbed for easy handling. The cap is specially designed to...