10028 results for 'gl45 port cap'

Dispensing Bottles with Sealer Cap, LDPE, 1oz. Sealer Cap dropper bottles are supplied with spout and sealer caps. Sealer cap snaps on easily for tight seal. Spout openings are standard .030”...

Dispensing Bottles with Sealer Cap, LDPE, 16oz. Sealer Cap dropper bottles are supplied with spout and sealer caps. Sealer cap snaps on easily for tight seal. Spout openings are standard .030”...

Dispensing Bottles with Sealer Cap, LDPE, 2oz. Sealer Cap dropper bottles are supplied with spout and sealer caps. Sealer cap snaps on easily for tight seal. Spout openings are standard .030”...

Cap Assembly, 50mL Standard Spinner Flask. Cap Assembly, 50mL Standard Spinner Flask. Made in the United States.

BenchMark C1005-SC5 5ml Screw Cap Tubes, Non-Sterile, Caps Packed Separately, 500/Pack (5 Bags of 100) The C1005-SC5 from BenchMark is a high-quality 5mL MacroTube designed for efficient sample...

Flask, 250mL, Volumetric, Snap-Cap. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-beaded, heavy-Tubing necks, tooled for snap-cap...

Replacement GL Caps, GL-25, Blue, Solid Polypropylene. Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.

Cap, Screw, 24-400, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

28-400 White Polypropylene Sprayer Pump with F217 PE Foam Liner with 7-3/8" Dip Tube. Spray Bottle Top fits 28mm spray bottles with a 28-400 closure style Style: F217 Lined Trigger...

20mm 0.060" Natural PTFE/Silicone Septa. PTFE/Silicone Septa resist coring and provide great resealability. These septa are available in a variety of colors for easy sample identification.

HPLC Waste Kit - Plus, 70mm 8TPI, 10-port, size L (4 x 1/4" NPT, 6 x 1/4-28) Often preferred in laboratories due to their adherence to UN/DOT standards, these “tighthead” containers with...

Cap, Screw, 24-400, TFE Liner. This cap is fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps are provided with a glued-in rubber liner...

Cell Strainer Caps for FACS Tubes offer an efficient solution for preparing cell suspensions by straining cells from clusters and tissue. Designed for compatibility with 12x75mm FACS tubes and...

NMR Tube Cap, 5mm, Red. Made from polyethylene, these caps are sized to fit 5mm O.D. NMR sample tubes. Cap fits tightly to stay in place during increased internal vaporization pressure. Available in...

24mm 0.125" Natural PTFE/Silicone Septa Packed in bags of 100. PTFE/Silicone Septa resist coring and provide great resealability. These septa are available in a variety of colors for easy sample...

NMR Tube Cap, 5mm, Blue. Made from polyethylene, these caps are sized to fit 5mm O.D. NMR sample tubes. Cap fits tightly to stay in place during increased internal vaporization pressure. Available in...

NMR Tube Cap, 5mm, Green. Made from polyethylene, these caps are sized to fit 5mm O.D. NMR sample tubes. Cap fits tightly to stay in place during increased internal vaporization pressure. Available...

Bottle Assembly, 250mL, 2-Port, Single-Use with Male Luer. Strain relief molded into stopper at Tubing exit areas to prevent kinking Manufactured, assembled and packaged in Class 7 cleanroom USP...

Plug Cap, 16mm, 1000/Bag. Polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

Barbed Fittings for soft wall flexible tubing, measured by ID (Inner Diameter), for "Type C" 1/8" NPT threaded holes in port caps, Polypropylene, pack of 10. Often used for instrument waste...

Cap, Snap, 17mm, Dual Position, LDPE, 500/Bag, 2 Bags/Unit. dual position cap is produced from low density polyethylene (LDPE) and is ribbed for easy handling. The cap is specially designed to...

Plug Cap, 16mm, Red, 1000/Bag. Polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

Replacement GL Caps, GL-32, Blue, Solid Polypropylene. Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.

Transfer Cap Assembly, 2,000mL, Advantaflex Tubing, 53B, Vented, Plugged End, Sterile. Transfer cap assemblies, vented for Single Use Media bottles are a cost effective and convenient way to transfer...

Cap, Screw, 38-430, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

6 Liter PFA large bottles, Each. High purity, non-contaminating, inert PFA Leak proof seal with 2 piece cap and plug design Positive seal at cryogenic temperatures Possible cap configuration with...

Flask, 100mL, Volumetric, Snap-Cap. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-beaded, heavy-Tubing necks, tooled for snap-cap...

Bottle Assembly, 125mL, 2-Port, Single-Use with Male Luer. Strain relief molded into stopper at Tubing exit areas to prevent kinking Manufactured, assembled and packaged in Class 7 cleanroom USP...

Plug Cap, 16mm, Green, 1000/Bag. Polyethylene (PE) plug caps are designed in 11mm, 12mm, 16mm and 17mm sizes and are available in a selection of colors for sample identification.

Dispensing Bottles with Sealer Cap, LDPE, 1/2oz. Sealer Cap dropper bottles are supplied with spout and sealer caps. Sealer cap snaps on easily for tight seal. Spout openings are standard .030”...

20mm 0.125" Natural PTFE/Silicone Septa. PTFE/Silicone Septa resist coring and provide great resealability. These septa are available in a variety of colors for easy sample identification.

Cap, Screw, 40-400, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

The Knurled Ferrule Cap Nut, with a diameter of 4mm, is designed to seal off tubing connections and features: Service temperature range of PFA: -328°F to 500°F (-200°C to 260°C)

Protect your valuable cell culture samples. These caps for Thermo Scientific™ Nunclon™ Delta Flasks are offered in two styles—vent/close (solid) and filter—to meet your...

Cap, Screw, 24-410, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Cap, Screw, 18-415, Rubber Liner. These caps are fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving. Caps have a glued-in, white rubber liner...

Cell Strainer Caps for FACS Tubes are designed for use with 5mL (12×75mm) culture and FACS tubes, providing an efficient solution for detaching, isolating, and straining cells from clusters and...

Cell Strainer Caps for FACS Tubes are designed for use with 5mL (12 x 75mm) culture tubes and FACS tubes. These sterile caps are perfect for detaching, isolating, and straining cells from clusters...

NORLOC Cap, NMR Tube, 3mm, Green Envy. Advance to the next level of sample security, personal safety and time savings. Combine Norell NorLoc II Security Caps with Norell Secure Series NMR tubes and...

NORLOC Cap, NMR Tube, 3mm, Lemon Yellow. Advance to the next level of sample security, personal safety and time savings. Combine Norell NorLoc II Security Caps with Norell Secure Series NMR tubes and...