DWK Life Sciences (WHEATON)|
DILVAC Dry-Ice Maker, Pressure Hose and Pressure Gauge
SCILOGEX DILVAC Dry-Ice Maker, Pressure Hose and Pressure GaugeDilvac Portable Dry-Ice Maker
The DILVAC Portable Dry-Ice Maker is the fastest way of providing a block of Dry-Ice for your needs. It is compact and lightweight, requires no electrical power and is safe and simple to use. Most importantly it is there to give you immediate access to Dry-Ice (-109.3°F) when you need it. The economy of having Dry-Ice 'on-tap' can provide considerable financial savings.
The DILVAC Portable Dry-Ice Maker produces a block (not slush!) of approximately 2.2Lbs (1KG) in weight in about 1 minute. Yield from a 75 lbs liquid cylinder - 5 to 6 blocks at room temperature. (Yield can appreciably increase at lower ambient temperatures, i.e. @ 41°F approximately 1/3 more blocks may be produced.)
The unit comes complete with hose ready to connect to a cylinder of compressed liquid CO2 with an internal siphon and standard CGA-320 valve. Full instructions provided. (Note: We do not sell gas cylinders/tanks, which can be obtained from local gas dealers or welding supply stores.) 2 year warranty.
Dilvac Portable Dry-Ice Maker Specifications:
|Dimensions of Dry-Ice Maker||Dimensions of block produced|
|8.9" Long x 6.3" Wide x 6.3" High||7.0" Long x 3.2" Wide x 4.3" High|
Dilvac Portable Dry-Ice Maker Ordering Information:
|SCI-300002||Dilvac Portable Dry-Ice Maker, with steel pressure hose and gas pressure gauge|
Click PDF to download the Spec Sheet for: Portable Dry-Ice Maker
SCI-300001 DILVAC Dry-Ice Maker, Pressure Hose and Pressure Gauge. The Portable Dry-Ice maker is the fastest way of providing a block of Dry-Ice to your lab. It is compact and lightweight, requires no electric power and is safe and simple to use. Most importantly, it is always there in the lab to give you immediate access to Dry-Ice WHEN YOU NEED IT. The economy of having your Dry-Ice ?on tap? can provide considerable financial savings over a relatively short period as the cost of having Dry-Ice delivered to your lab can be prohibitive. The SCILOGEX Portable Dry-Ice maker produces a block of approx.2.2Lbs in weight in approximately 1 minute, and all you have to do is connect the unit to a cylinder of CO2, and turn on the tap. Remember, it has to be a LIQUID cylinder with an internal siphon.
The unit comes with easy to follow operating instructions. Briefly, this is how it works.
- Connect unit to Liquid CO2 cylinder and turn on.
- Monitor flow of liquid by means of pressure gauge provided.
- When block is made, turn off gas on cylinder; unclip lid and sides of unit.
- Remove block. GLOVES MUST BE WORN.
- Replace sides and lid of unit to instantly make another block if required.
USE DRY - ICE IN : Hospitals, Research Labs, Tissue Preservation, Food preservation, Specimen transportation, Recreational purposes. WARNING : Gaseous CO2 vapors can cause suffocation, so use the unit only in well ventilated areas. Also, use the unit only on a level supporting surface. Never allow the unit to hang from the feed hose.
DO NOT HANDLE DRY-ICE WITHOUT GLOVES, REMEMBER, IT IS A VERY COLD AT -80°C.