Spill Deck P4, Flexible Model with Bladder System

UltraTech 1362 is a low profile, low cost spill containment system which helps to meet regulations.

Features:

• Use for intermediate bulk containers (IBCs), drums, or other large vessels (all materials stored must be chemically compatible).
• Available with optional Bucket Shelf for either or both sides - catches small leaks or spills during dispensing.
• Grates are easily removed for quick clean-up.
• One continuous sump holds 535 gallons - meets EPA Spill Containment and SPCC Regulations for two IBC tanks.
• Protected by the industry's strongest warranty- Five (5) years against any material or workmanship defects.
• Made in the USA.

Specifications:

• Measures: deployed 106-inches length by 66-inches width by 5-inches height closed 51-inches length by 48-inches width by 5-inches height.
• Containment capacity - 66 gallons.
• 100 percent re-cycled content.
• Uses little storing space.
• Low Profile, low cost spill containment.
• 6000 pounds uniformly distributed load capacity.
• 44 gallons sums capacity prior to bladder.
• In compliance with SPCC, EPA Container Storage Regulation 40 CFR 264.175, and UFC Spill Containment Regulations

Documents

• Ultra-Twin IBC Spill Pallet Product Data Sheet
• IBC Spill Containment Comparison Guide
• Chemical Compatibility- Polyethylene

WARNING: This product can expose you to chemicals including Folpet, which is known to the State of California to cause cancer. www.p65warnings.ca.gov