UltraTech
Drain Guard Filter to Remove Oil and Sediment, 0.83 gallon
- Part Number:
- UT-9217
- Lead Time:
- 3-5 days
- Minimum Purchase:
- 1 unit
- Shipping:
- FREE SHIPPING on most orders over $50*
- Quantity:
- each
Bulk discount rates
Automatically save when you buy in bulk.
| Buy 6 - 11 | and get 10% off |
| Buy 12 or above | and get 15% off |
Description
Stormwater pollution has become a major concern both locally and on a national level. Ultra-Drain Guards remove waste from Stormwater before it can become a problem in the water system. Our Storm Water Runoff Control Drain Guard filter for catching oil and sediment will help you comply with Stormwater Runoff requirements. This Drain Guard is positioned underneath a grate and catches sediment as Stormwater runoff washes through it. Use rebar or UltraTech Retainer Rods (UT-923DGR) to keep the catch basin in place while replacing grates or removing the Drain Guard from the open drainway. Ultra-Drain Guard® catch basin keeps sediment and other pollutants from entering the water system!
- Oil and Sediment Models # UT-9217 and UT-9356 remove up to 0.87 gallons of hydrocarbons as well as dirt, sand and other contaminants.
- Exceeds 80% sediment removal efficiency
- Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
- Designed for practical use in:
- Industrial Facilities - keep oil and other contaminants from entering storm drains.
- Construction Sites - capture eroded soil and wind-blown debris.
- Parking Lots, "Drive-Up" Retail Facilities - selected geotextiles collect oil, fuel and other contaminants that drip from cars
| ULTRA-DRAIN GUARD | |
| Oil and Sediment Model: 48" x 36" | Oil and Sediment Model: 60" x 60" |
| Part# UT-9217 and UT-9218, 48"L x 36"W x 18"H (1220 mm x 915 mm x 458 mm) | Part# UT-9356, 60"L x 60"W x 18"H (1-Pack) (1524 mm x 1524 mm x 458 mm) |
| Weight: 1 lbs. (1/2 kg) | Weight: 2 lbs. (1 kg) |
| Performance - Oil: Up to .87 gallons (3.5 L) Sediment: Up to 40 lbs. (18 kg) | Performance - Oil: Up to 1.55 gallons (5.9 L) Sediment: Up to 40 lbs. (18 kg) |
| The total water flow rate through the insert in new condition is in excess of 500 gpm. The bypass rate is approximately 700 gpm. | The total water flow rate through the insert in new condition is in excess of 900 gpm. The bypass rate is approximately 700 gpm. |
| Options: Grate Lifter (Part# UT-9234) , Grate Hook (Part# UT-9235) , Retainers (Part# 9237 or 9238) | |
| Compliance: 40 CFR 122.26 | |
| Instructions | |
| Material Specifications | |
| Ultra-Drain Guards have been approved by DOTs in North Carolina, Oregon, Mississippi, Washington and Texas. | |
Typically ships from Florida.