CP Lab Safety
Acticosart Syringe Carbon Filter, 0.45 PTFE, pack/12
- Part Number:
- SRT-17840
- Lead Time:
- 7-10 days
- Minimum Purchase:
- 1 unit
- Shipping:
- FREE SHIPPING on most orders over $50*
- Quantity:
- 12
- Color:
- blue
- Style:
- syringe filter
Bulk discount rates
Automatically save when you buy in bulk.
| Buy 6 - 11 | and get 10% off |
| Buy 12 or above | and get 15% off |
Description
Non-sterile Minisart® Acticosart syringe carbon filters are packaged in convenience pack but can be sterilized using Ethylene oxide by the end user if necessary. Reduce waste and make handling easier whenever the application allows venting under non-sterile conditions. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The active carbon filling adsorbs molecules, e.g. unpleasant smell resulting from polymerisation reactions. The housing of the filter is made of MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test. It is glueable, e.g. to tubing, what enables assembly and sterilization by the user.
Minisart® Acticosart with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases with a pH of 3 - 12. Type 17840 has a 0.45µm PTFE and a reservoir with active carbon. It can be used for venting and adsorption of substances. It has a male luer slip inlet and outlet.
- Convenience packs
- PVC-free
- Active carbon filling
- Glueable to tubing
| Non-Sterile |
| Hydrophobic |
| Filtration Devices |
| Minisart® |
| Male Luer Slip |
| Male Luer Slip |
| Polytetrafluorethylene (PTFE) |
| No |
| 5.3 cm² |
| 26 mm |
| 2300 mL/min with air at 0.1 bar (1.5 psi) |
| 0.45 µm |
| Active coal |
| Application | Buffer & Media |
| Area of application | Venting / Moisture Barrier |
| Cytotoxicity | According to ISO 10993-5 |
| Biosafety | All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests.) |
| Non-Fiber Releasing | This filter product complies with the title 21 of the Code of Federal Regulations (CFR) , section 210.3(b) (6) and 211.72. |
| Housing material | Acrylic-based multipolymer compound (MBS) |
| Device type | Syringe Filters |
| Sample Type | Air/Gas |
| pH Range | 3.0 – 12.0 |
| Maximum Pressure | 4.5 bar |
| Operating Pressure | 1 bar (14.5 psi) |
| Max. temperature | 60° C |
| Bubble point | Min. value with ethanol 0.9 bar (13 psi) |
| Burst pressure | Min. value 7.0 bar (102 psi) |
| Filter diameter | 26 mm |
| Housing dimensions | 33 × 51 mm |