AcroPak 1000 Capsule with Supor Membrane, Sterilized by Gamma Irradiation, 0.1/0.1 um Pore Size, 19.3 cm L x 6.9 cm Diameter

• Filter Media: Supor [hydrophilic polyethersulfone (PES)] membrane
• Housing: Polypropylene
• Sealing Technology: Thermal bonding
• Filling Bell: Polycarbonate
• Type: Capsule Filter
• Use: Microfiltration
• Pore Size: 0.1/0.1 μm
• Effective Filtration Area: 1000 cm²
• Housing Diameter: 6.9 cm
• Inlet/Outlet Connections: 6.4 - 12.7 mm (1/4 - 1/2 inch) stepped hose barb with filling bell on outlet
• Typical Water Flow Rate: 0.4 Lpm at 0.1 bar (10 kPa) [Lpm/psi]
• Typical Hold-Up Volume: 45 mL with 10 psi air purge
• Maximum Operating Temperature: 60 °C
• Maximum Operating Pressure: 4.1 Bar
• Bacterial Retention: Lot samples retain a minimum of 10&sup7; cfu/cm² of A. laidlawii challenge per modified ASTM F838, current revision
• Endotoxin Level:<0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Hydrophilic polyethersulfone (PES) membrane capsule filter is suitable for fast, final filtration and high throughputs for liquid volumes up to 150L. Ideal for solutions requiring low protein binding. Provides higher throughputs and faster flow rates than similarly-sized competitive devices.

This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Pall®.

All images used are for illustrative purposes only and may not be an exact representation of the product.

Most PALL® items are made-to-order with a typical lead time of 4-6 weeks. However, you can establish a blanket order with to ensure a quick regular delivery. Please contact us for blanket ordering.