AcroPak 20 Filters with Supor Membrane (Hydrophilic polyethersulfone), 0.8/0.2 µm Pore Size, Sterile, pack/3

• Filter Media: Supor membrane(Hydrophilic polyethersulfone)
• Housing: Polypropylene
• Sealing Methods: Thermal bonding
• Filling Bell: Polycarbonate
• Type: Capsule Filter
• Use: Microfiltration
• Pore Size: 0.8/0.2 μm
• Effective Filtration Area: 20 cm²
• Housing Diameter: 6.7 cm
• Inlet/Outlet Connections: 6.4 - 12.7 mm (1/4 - 1/2 inch) diameter stepped hose barb with female luer slip interior and filling bell outlet
• Typical Hold-Up Volume (with 10 psi air purge): ? 2.5 mL
• Typical Liquid Flow Rate (1Cp): 40 mL/min at 0.1 bar (10 kPa)
• Maximum Operating Temperature: 60 °C at 1.0 bar (100 kPa, 15 psi)
• Maximum Operating Pressure: 4.1 Bar (410 kPa, 60 psi) at 21 - 24 °C
• Integrity Test Minimum Bubble Point - Water: 3.5 bar (350 kPa, 51 psi)
• Bacterial Retention: Lot samples retain a minimum of 107 cfu/cm2 of B. diminuta per modified ASTM F838, current revision
• Endotoxin Level: < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test
• Biological Safety: Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>
• Sterilization: Sterilized by gamma irradiation and individually packaged

Hydrophilic polyethersulfone (PES)] membrane capsule filter is suitable for use with fluids containing dilute proteins, preservatives, or other critical components.

This product is not approved for use in medical, clinical, surgical or other patient applications.

All images used are for illustrative purposes only and may not be an exact representation of the product.

Most PALL® items are made-to-order with a typical lead time of 4-6 weeks. However, you can establish a blanket order with to ensure a quick regular delivery. Please contact us for blanket ordering.