Bench Top Splash Shield, Acrylic, 20" W x 12" D x 20"

Bench Top Splash Shield, Acrylic, 20" W x 12" D x 20".

• No eye-level distortion
• Extra wide top

Lower bend and wider top gives greater visibility of work surface and assures greater protection from splashes to face and neck area. The Splash Shield has been designed to be used comfortably either from a standing or sitting position. The gentle bend from the base allows the technician to observe the working surface from a comfortable sitting position.

The lower area of the Shield is just 12" wide, thus making it easy to reach behind the Shield to pipette, open vials or perform any number of functions, while protecting the operator from being accidentally splashed. Fabricated from 1/4" clear acrylic for excellent stability. Non-skid feet. Not suitable for radiation protection.

DL-172284 Measurements: base – 20" W x 12" D; face area – 20" W x 15" H; overall – 20" W x 12" D x 20" H.
DL-172014 Measurements: base – 12.8" W x 8.2" D; face area – 20" W x 14.75" H.

Important Cleaning Note:   Should the acrylic surfaces of acrylic products need cleaning, DO NOT USE ANY SOLVENTS OR ABRASIVES (alcohol, acetone, etc...) USE OF THESE MATERIALS WILL CAUSE CRACKING OR CRAZING OF THE ACRYLIC. For general cleaning wash the surface with a mild detergent and soft cloth, then rinse thoroughly with clean water.