Dental Clean Air Portable HEPA Air Filtration System

The Extract-All® Model 987-DCA Compact Air Cleaning System gives you a safer, healthier workplace by capturing and removing contaminants at the source. Single station system collects and filters aerosols and splatter produced by the use of high-speed equipment such as scalers and drills.

One of the biggest concerns in dentistry relates to the potential spread of infection among both dental professionals and their patients. This unique design allows the system to be set in a vertical or horizontal position, on a bench-top or floor. Additionally, the caster base allowing for portable use as well as a 6” diameter bell hood are included standard.

Because of the exclusive modular design of our 987 Series, inlet covers are interchangeable. If you decide at a later date you would like a two-arm cover or downdraft cover, you can purchase those options at that time. Swapping out inlet cover options takes just seconds! Multiple filter combinations are available to accommodate countless applications that require fume, dust, smoke, and vapor removal.

Features and Benefits

• Helps ensure compliance with current and future OSHA regulations
• Versatile and portable
• Unlike other systems on the market, the unique extractor arms have no internal supports or articulated bends which restrict airflow – CFM is increased by up to 50% over internally supported arms.
• UL & CE approved

All systems feature:

• Base System
• 3” Diameter self-supporting extractor arm
• 6” diameter removable capture hood
• MERV 10 pleated prefilter
• Poly-Panel secondary filte
• 99.99% HEPA Filter
• Casters
• 350 CFM Motor
• Standard 3-year warranty
• Baked polyurethane powder coated paint finish inside and out
• Exhaust Silencer; Low noise levels

Specifications:

Orientation: Can be mounted horizontally or vertically

Cabinet: 18 Gauge Steel, Polyurethane powder coated pain inside and out

Cabinet Dimensions:
12-½” W x 12 ½” H x 19-½” D in horizontal position
12-½” W x 19-½” H x 12 ½” D in vertical position

Blower: 350W, 2.8 AMPS, 120/1/60, 2000 RPM, variable speed control, and power cord with plug

Typical Motor Life: 100,000 hours – depending on operating conditions, including ambient temperature, duty cycle, etc.

Rated Fan Performance:
350 CFM @.5” E.S.P.
240 CFM @2.0” E.S.P.
100 CFM @ 2.75” E.S.P.

Velocity at extractor arm inlet: 3500 FPM

Airflow at extractor arm inlet: 162 CFM

Noise Level: 65 dBA

Filters:
MERV 10 Prefilter
Poly-Panel Secondary Filter
99.99% HEPA filter

Applications

• Dental Aerosols & Overspray
• Adhesive Glue Fumes
• Anesthesia Procedures
• General Laboratory Fumes and Dust
• And a variety of additional applications that create dust, smoke, or other airborne contaminants