EZGrip® Carboy Lever Spigot with Two Flow Rates, Up/Down, Each

Foxx Life Science EZgrip carboy spigots have large levers that control two flow rates, one for continuous, locked flow and the other for a faster, manual flow. The spigot spout features 5/8" and 3/4" hose barbs, and a standard internal luer tape to fit a male barb adapter. The spigot body has internal threads with a hard stop to prevent over-tightening which may damage the seal.

Spigots are made from polypropylene, which may be autoclaved at 15 PSI and 121°C (250°F) for 20 minutes.

• Two flow rates (continuous or manual)
• Made from Class VI autoclavable polypropylene
• Internal threads with a hard stop to prevent over-tightening

Specifications:

• Thread: 1 1/8
• Material: Polypropylene
• Length: 1.5" (38 mm)
• Width: 2.9" (74 mm)
• Height: 4.0" (102 mm)