Justrite® Brass Drum Vent Kit with 3/4" Reducer

Justrite® Brass Drum Vent Kit with 3/4" Reducer

Part Number:
Lead Time:
3 days
Free Shipping on most orders over $50*
Bulk Pricing:
Buy in bulk and save


Provide emergency pressure venting in the event of a fire to avoid drum failure and catastrophic consequences. All safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55kPa) and include a flame arrester to absorb and safely dissipate heat. Valve within the vent is tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds for vacuum relief during drum dispensing operations. Vacuum relief permits smooth liquid flow and prevents possible drum collapse and leakage. Vacuum relief is automatic on vertically-installed vents and manual on horizontally-installed vents.

Safety fill vents and funnels fit the 2-in (51-mm) bung on a vertically-stored drum. The brass vent provides automatic pressure and vacuum relief, and includes a brass cap with safety chain tethered to the vent to prevent misplacement or loss. Remove cap during drum filling operations. Model no. 08211 includes a 9-in(229-mm) wide polyethylene funnel to facilitate solvent waste disposal and reduce spillage. Keep vent capped in closed position after filling operations to prevent flammable vapor from escaping. Six-inch (152-mm) flame arrester safely dissipates heat and prevents flashback from external ignition sources.


  • Brass-Vertical
  • FM Approved


  • Model No.: 08102
  • International Model No.: 08102
  • Material Specifications: Brass
  • FM Approval: Yes
  • NPS/NPT inch: Both
  • NPS/NPT mm: Both
  • Net Weight, lbs: 2.0
  • Net Weight, kg: 0.9

Customers Also Viewed

Justrite® Aerovent Drum Vent for 0.75" Bung
Part #: JP-28207


Justrite® Aerovent Drum Vent for 2" Bung
Part #: JP-28206


Product Reviews