Nalgene® 3110-42 PETG Square Biotainer Bottles, Sterile, 1 Liter, Lab Pack (Packed in bags of 5), case/35

PETG 1L InVitro Biotainers are supplied sterile and ready to use. Wrapped in bags of 5, packed into cases of 35 bottles. Indented, ribbed handgrips and printed graduations are featured. Materials meet current USP VI, are non-cytotoxic and non-pyrogenic. Reduce the risk of carry-over contamination by eliminating the cost of cleaning, sterilizing and associated validations.

• Durable, crystal clear PETG for sample integrity
• Closures with polyethylene foam core liners for leakproof† assurance
• Custom options available for fluid transfer applications
• Supported by extensive validation documentation
• Suitable for storage in conditions from -40° to +70°C

† The term "leakproof" applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted, withstand air pressure of 2psig for 2 minutes, and no water escapes;. b) Bottle/funnel/flask closure systems of larger than 100mm after they are filled with water, inverted for 15 minutes, and no water escapes. Note: these tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.

Typically ships from New York. - See more at: https://www.thermoscientific.com/en/product/nalgene-petg-invitro-biotainer-bottles.html#sthash.IFsHjlVW.dpuf

• Durable, crystal clear PETG for sample integrity
• Closures with polyethylene foam core liners for leakproof† assurance
• Custom options available for fluid transfer applications
• Supported by extensive validation documentation
• Suitable for storage in conditions from -40° to +70°C

† The term "leakproof" applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted, withstand air pressure of 2psig for 2 minutes, and no water escapes;. b) Bottle/funnel/flask closure systems of larger than 100mm after they are filled with water, inverted for 15 minutes, and no water escapes. Note: these tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.

- See more at: https://www.thermoscientific.com/en/product/nalgene-petg-invitro-biotainer-bottles.html#sthash.IFsHjlVW.dpuf