PostGuard
Rubber Mini Hump Modular Speed Bump
- Part Number:
- PG-MSH
- Lead Time:
- 7-10 days
- Minimum Purchase:
- 1 unit
- Shipping:
- FREE SHIPPING on most orders over $50*
- Quantity:
- each
- Color:
- black
- Material:
- rubber
Bulk discount rates
Automatically save when you buy in bulk.
| Buy 6 - 11 | and get 10% off |
| Buy 12 or above | and get 15% off |
Description
The Safety Rider® rubber mini hump is a unique modular traffic calming device designed to slow traffic while maintaining a continuous traffic flow. The mini hump is constructed of interlocking units with a tongue and groove system. This allows the humps to be linked together to cover the width of any roadway. End caps are available to provide a smooth finish to the ends of the hump.
Each standard section is 35.5" L x 19.5" W x 2.1" H, and optional end caps are 35.5" L x 17.5" W x 2.1" H.
| Approximate Length | Sections Required (without end caps) | Sections Required (with end caps) |
The Safety Rider® mini speed bump is constructed from 100% recycled tires. Unlike asphalt humps, our mini humps are preformed for a uniform and consistent profile and a smooth, safe ride. The mini hump speed bumps are simple to install and do not require road closures. Plastic shields are inserted into pre-drilled holes and the units are bolted down to keep from shifting. The Safety Rider® can be easily removed for storage or relocation.
Mini speed humps are ideal for slowing traffic in school parking lots and crossings, playground areas, hospitals, parking facilities, and anywhere a slow traffic flow is required. Heavy load bearing truck traffic is ideally facilitated by the Safety Rider® mini hump.
Molded highly reflective tape provides optimal visibility even on a dark night, alerting drivers well in advance. Safety Rider®mini hump speed bumps are covered by a 3 year warranty.
Safety Rider® mini hump speed bumps are:
- Made of 100% recycled rubber
- (L) 35.5" x (W) 19.5" x (H) 2.1"
- Interlocking design expands to any road width
- Tongue and groove system keeps product firmly in place
- High visibility with embedded highway tape
- Easy installation on any paved surface
- No skilled labor required
- Lightweight and removable
- Maintenance free
- Warranty: 3 years on the product; 1 year on the tape (under normal use)
Applications:
Used in the following situations:
- Speeding of motor vehicles create danger and noise pollution
- Temporary installation is required to test traffic safety programs, during street fairs, or other pedestrian activity events
- Only temporary installation is allowed due to snow removal
- Where heavy truck traffic is common
- Shipping ports for sea cargo
Technical Specs
| General description: Safety Rider® mini humps of required lengths are constructed using the interlocking middle and the end cap modules. The standard foot print dimensions of each module are 35.5" by 19.5". The end caps are with the similar footprint as the middle modules. The weight of the middle modules is 36 lbs each, the end cap modules weights 33 lbs. Each unit is bolted to a paved road surface using six lag bolts 3/8" dia. through a plastic shield installed in the road surface. |
| Dimensions of the modules:
|
| Material Compression molded 100% recycled rubber and polyurethane composite |
| Physical properties:
|
| Marking: Rubber modules are available in black with yellow or white in-molded reflective tape |
| Warranty A 3 year warranty is provided on all Safety Rider® components installed as per the manufacturer's installation instructions. |
Extended Information
| Installation Guide |
| Components
|
| Installations Tools |
|
| Crew |
| 2-4 installers (depending on the solution installed)
|
| Installations Instructions |
| Step 1. Determine the location of the Safety Rider® mini hump and sweep the surface clean of debris / dust. Use chalk to mark the center lines (parallel and perpendicular to the direction of the street) and border lines on the surface. |
| Step 2. Assemble and position the units, starting from the center line (parallel to the direction of the street.) Note: Make sure the units are tight and well aligned before moving on to step 3. |
| Step 3.
Note: Make sure the holes are clear of dust and debris before installing the shields. (A portable blower is useful for this purpose) |
| Step 4. Insert the bolts and steel washers into the product installation holes and tighten every element. Do not over tighten. |
| Maintenance |
| Mini Humps require minimal maintenance. Periodically inspect the bolts and tighten if necessary. |
Drill 9/16" diameter holes into the surface, through the existing holes of the placed units. The holes should be 3 1/2" - 4" deep in order to accommodate the plastic shields that are 3" long. After each hole is drilled, insert a plastic shield in order to keep the units from shifting.