Tubing, Neoprene, 90cm, for Bunsen Burner Gas inlet 8-10mm. Tube has 7mm ID and 12mm OD

Tubes Neoprene 90cm. This premium quality neoprene tubing hose connects your laboratory burner to a fuel source such as liquid propane, butane, or natural gas. The hose is commonly used to connect basic, flame stabilizing, meker, tirrill, micro and gas adjustable Bunsen Burner, s. Hose measures 3 feet (0.9m) in length and both ends are designed to fit gas inlet connectors with diameter of about 8-10mm. Inner diameter at tube ends measures approximately 7mm and outer diameter is approximately 12mm.

Note: the hose should always be used in a lab setting connected to a gas jet and never connected directly to a fuel source. Due to the nature of neoprene, please inspect hose before every use to make sure there are no holes or cracks.

• Neoprene: premium quality neoprene tubing hose is flexible, safe and resilient - perfect for any science laboratory
• 3 feet: tubing is 3 feet (0.9m) in length, making the hose ideal for spread-out laboratory setups
• Fits standard gas inlets: designed for connecting a standard 8-10mm diameter gas inlet jet to Bunsen, tirrill, meker and other laboratory burners
• Product Dimensions in (L x W x H): 5 x 5 x 1