Spill Pallet P3 Plus, No Drain

UltraTech 9626 spill pallet plus model! It is a combination of low profile features and high strength as EPA container storage regulations are met.

Features:

• Sidewalls remain down during normal operations, loading and unloading. Vehicles and equipment can drive in and out from any angle, with no sidewall set-up or take-down required.
• In the case of a spill, the foam ring around the top perimeter of the Containment Berm rises with the level of spilled liquid.
• Available in Copolymer 2000 and PVC. Custom materials also available.
• Provides quick and easy spill containment for drums, IBCs, vehicles, frac tanks and other large containers.
• Helps meet EPA Container Storage Regulation 40 CFR 264.175 and SPCC requirements.
• Custom sizes available.
• Built-in handles help with transport and placement.
• Made in the USA.

Specifications:

• Uniformly distributed load: 4500 pounds.
• Measures 83-inches length by 34-1/2-inches width by 8-3/4-inches height.
• Containment capacity: 66-gallons.
• Low profile positions drum funnels.
• Potential for hazardous fluids to splash is reduce.
• 50% lower than all standard spill pallets.
• Forkliftable
• All-polyethylene construction
• Containment for 3 -55 gallon drums
• Used to store three 55 gallon drums or smaller containers

Documents

• Ultra-Containment Berm Rapid Rise Spec Sheet
• Ultra-Containment Berm Comparison Guide