Chemical Feed Supply
Drum Lock Safety Clamp for 3/8" Drum Probe, Choose Color
- Part Number:
- CFS-1118-BLUE
- Lead Time:
- 3-5 days
- Shipping:
- FREE SHIPPING on most orders over $50*
- Quantity:
- each
- Size:
- 2 inch
- Closure Size:
- 2 inch
- Material:
- polypropylene
- Style:
- drum feed clamp
Bulk discount rates
Automatically save when you buy in bulk.
Buy 6 - 11 | and get 10% off |
Buy 12 or above | and get 15% off |
Description
Cleaning & Sanitation Drum Lock Safety Clamp with Black Chemical filter; used solely for applications where a 3/8" solid drum probe is used for feeding chemicals;. Chemically resistant to high-strength acids and bases, this is our most application-specific model. Ideal for anyone who uses chemical feeds and Clean-in-place (CIP) methods.
A safe, fast, effective way to increase the safety of your chemical feed system. Outer drum-lock clamp housing is made of polypropylene and is available in 7 colors to reduce cross-contamination of chemicals, by color-coding safety devices to chemical drums. This Clamp is used when you want to store a chemical drum that has been opened and the opening needs to be closed or re-sealed.
- Only for use with plastic drums. Do not use with metal drums.
- As a general rule, these drum locks fit standard plastic UN chemical drums between 15-gallon and 55-gallon that feature a 2" opening with a flange. The precise size range that it will fit is 85mm-92mm. If the widest part of your drum opening is within this range, the clamp will fit securely.
- for Canadian drums, we can install an adhesive foam strip at your request to enable the clamp to fit on the slightly smaller opening typically found on Canadian-made drums.
- Allows you to close off an open chemical drum bung and reduce vapors and harmful gasses from escaping
- Includes an enhanced, cross-linked, closed-cell, high-density copolymer filter that provides optimum chemical resistance
- Includes 1 EPDM tapered plug
- Recommended for cleaning & sanitation applications using a 3/8" drum probe
- Clamp can be applied or removed at any time during chemical feed operation
- Can be used in conjunction with a Chemical Drum Seal Tag (# CFS-1014_10pk), for compliance with the FDA FSMA (Food Safety Modernization Act). It allows you to seal a chemical drum, while feeding product.
Density rating: LD45
Default hole size: 16mm
- Recommended for all water treatment applications, including where a high-strength acid or base are involved
- Recommended for cleaning & sanitation applications, including feed systems where multiple tubes and/or probes are being used in the same bung opening
- Clamp can be applied or removed at any time during chemical feed operation
- Can be used in conjunction with a Chemical Drum Seal Tag (# CFS-1014_10pk), for compliance with the FDA FSMA (Food Safety Modernization Act). It allows you to seal a chemical drum, while feeding product.
Benefits:
- Easy to use and cost-effective solution to Chemical Feed Problems
- Reduces risk of direct chemical exposure due to "splashing"
- Improves "Indoor Air Quality" (IAQ) - helpful for OSHA inspections
- Reduces contamination of the chemical product by helping to eliminate any dirt, debris, moisture, or environmental hazards from entering the drum
- Aids to reduce cross-contamination by using color-coded Safety Clamps on chemical drums.
- Creates a "greener" work environment, which aids employee's health
- Solid Filter and Drum Seal Tags enable proper Lock out, Tag out procedure for safe storage of chemicals
Drum Lock Safety Clamp is used in the following industries:
- Beverage Processing
- Dairy
- Brewery / Distillation
- Water / Soda / Etc.
- Institutional
- General water treatment
- Pools & Spas
- Car Washes
- Hospitality
- Pharmaceuticals
- Chemical Processing
- Power Generation / Utilities
- Refining
- Mining
- Ethanol
- Food Manufacturing
- Semi-Conductor
- Pulp & Paper
- Health Care
- Laundry
- Design & Build Engineering Services
- Contract Manufacturing