Justrite® Rigid-Lock 12" Spill Containment Berm, Choose Size

Ergonomic design provides 100% inside berm accessibility with an unobstructed side-to-side floor space for vehicle tires, foot traffic, and cleaning. The patented Rigid-Lock wall-support design protects personnel against trips and falls when walking along the outside perimeter. Built-in stainless steel wall supports lock the sidewalls in a 12" (305-mm) high, 90° vertical position. The Rigid-Lock QuickBerm® offers immediate, secure deployment and no-worry, spill-readiness.

Like the QuickBerm Plus the standard QuickBerm withstands a broad range of chemicals including petroleum, oils, grease, and most acids-durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced Critical Corner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping, or sagging of the corners during full containment for fluid-tight reliability. Walls include a 1" (25-mm) fray-resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy-duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive-in and out. Portable design folds down quickly for storage and transport.

The built-in Rigid-Lock wall supports maximize usable space inside the berm and greatly reduce any tripping hazard on the berm perimeter. The device only folds down one way, inward towards the inside of the berm. The one-piece design folds down flat and remains integral to the sidewall. Supports resist extreme temperatures (-50F to 160F.) When in the down position, they can withstand vehicle weights in excess of 11,000 lbs (5,000 kg) at each tire. While in the up position, the supports will hold up to wind loads of 40 miles per hour. Additionally, Rigid-Lock supports will perform at full rim containment height-meaning the berm is entirely full-without bend or buckles. In case of damage, for example a user drives out of the berm without lowering the wall to the proper exit position, the stainless steel support rods are replaceable.

Helps comply with EPA for containment and spill prevention (SPCC.)

Features:

• Safe, drive-in spill containment for drums, IBC totes, and tanks
• Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space
• Quick and easy setup – no assembly required
• Durable EnGuard™ IV Modified PVC Coated Fabric withstands long-term UV exposure – great for outdoor use
• Helps comply with EPA SPCC regulations

Specifications:

• Model No.: 28512
• International Model No.: 28512
• Color: Black
• Material Specifications: Modified PVC coated fabric
• EPA Compliance: Helps comply with EPA for containment and spill prevention (SPCC)
• Capacity: 175 gallon
• Liter Capacity: 662
• Dimensions, Exterior: 12" H x 56" W x 80" L
• 305mm H x 1422mm W x 2032mm L
• Dimensions, Interior: 12" H x 48" W x 72" L
• 305mm H x 1219mm W x 1829mm L
• Dimensions, Folded: 24" W x 24" L x 5" H
• 610mm W x 610mm L x 127mm H
• Net Weight, lbs: 20.0
• Net Weight, kg: 9.1